High Quality CF-2 1/2 CF2 1/2 Inch Stud Type Cam Follower Track
Roller Bearing
single-row full-load needle rollers, the diameter, length and
number of needle rollers have been optimized to achieve high
dynamic and static rated load capacity with industry standard
bearing housing dimensions. Thick-walled outer ring The
thick-walled outer ring helps support radial loads and provides
proper support for rolling elements. Cylindrical outer diameter
(OD). Cylindrical outer diameter can improve performance in some
applications, such as by increasing the contact area of the raceway
to increase the load-carrying capacity of the raceway. Locally
hardened raceways Heat treatment is used to precisely harden the
raceway and flange working surfaces. The hardened surface provides
support for the contact stress of the rolling elements while
maintaining the toughness of the inner core layer to absorb impact
loads.
| CF KR SPECIFICATIONS |
| Model | Weight | d | D | C | B1 | B2 | G | G1 |
| No Seal | Reference model | (gram) | mm | mm | mm | mm | mm | mm |
| CF 3 | KR10 | 4.5 | 3 | 10 | 7 | 17 | 9 | M3X0.5 | 5 |
| CF 4 | KR12 | 7.5 | 4 | 12 | 8 | 20 | 11 | M4X0.7 | 6 |
| CF 5 | KR13 | 10.5 | 5 | 13 | 9 | 23 | 13 | M5X0.8 | 7.5 |
| CF 6 | KR16 | 18.5 | 6 | 16 | 11 | 28 | 16 | M6X1 | 8 |
| CF 8 | KR19 | 28.5 | 8 | 19 | 11 | 32 | 20 | M8X1.25 | 10 |
| CF10 | KR22 | 45 | 10 | 22 | 12 | 36 | 23 | M10X1.25 | 12 |
| CF10-1 | KR26 | 60 | 10 | 26 | 12 | 36 | 23 | M10X1.25 | 12 |
| CF12 | KR30 | 95 | 12 | 30 | 14 | 40 | 25 | M12X1.5 | 13 |
| CF12-1 | KR32 | 105 | 12 | 32 | 14 | 40 | 25 | M12X1.5 | 13 |
PHOTOS OF BEARINGS:
Packing of bearings":
Why Choose Us?
1. No MOQ, 1pcs ti is ok.
2. Supporting 7days refudn in case of bad qualty.
3. 24hours service
4. Welcome concat us for price list.
What kinds of payment terms do you offer?
1. Paypal is accepted.
2. Direct RMB is supported.
3. Payment online is supported.
4. Wester union is supported.
5. Less deposit is accpeted.
Cam Follower Bearings are also referred to as track follower. They are designed to
follow a sliding or rotating piece (cam) and they use rollers or
needles as the rolling elements. Cam Follower Bearings are
therefore able to replicate a specific motion because they are
highly versatile. They have thick-walled outer rings that run on a
track. They are used to minimize distortion and bending stress
while facilitating high load carrying capacity.Generally speaking,
cam follower bearings are designed in different configurations and
special structures can be designed according to the task
requirements.
Stud style cam follower bearing has one end plate integrated into the inner race (stud) and the
other pressed onto the stud unto a shoulder on the inner race. Both
ends of the stud have holes for lubrication and the inner race is
induction hardened to maintain some degree of softness in case some
modification is required.
Inch series: CR, CRH,CF,CFE,CFH,CFHE
Materials of cam follower bearings
Needle roller: Gcr15, quench-hardening HRC60-65
Rings:Gcr15
Cage:Low-carbon steel or reinforced nylon
Both the stud and yoke cam followers have an outer diameter that
may either be cylindrical or crowned. The crowned. The crowned ones
are often used in turntable type applications because they help
reduce skidding.
